Operation Manual
Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 86 All Rights Reserved!
6.17.2 Programming system options
Tip: Before starting with programming, take your time to consider how you want to programme the individual features and
note down the 2-digit status number which needs to be entered.
Input Display
=P REGISTER 1- 1=
1. Set the key to PRG.
2. Select programming number
13 (see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the input.
The first system option and its current
status appear in the display.
[32] STATUS NO.Mx-My
4. Enter the number of the system
option to be programmed, e.g.
13.
=P REGISTER 13- 1=
5. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] input area.
[10] STATUS NO.Mx-My
6. Enter the required 2-digit status
number, e.g. 51 (to switch off the
key tone).
[51] STATUS NO.Mx-My
7. Press the ┣CASH┫ key to confirm
the input.
8. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
6.17.3 Printing the system options
Input Display
=SETTINGS-PRG -90=
1. Set the key to PRG.
2. Programming number 90 is
automatically selected
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the input.
90.PRINT PROG DUMP
=PRINT PRG DUMP
The display shows what can be
printed.
DEPARTMENT
DEPARTMENT GROUP
PLU
LINK PLU
GROUP PLU
CLERK
TENDER MEDIA…
=PRINT PRG DUMP
4. Use the ┣↑┫ and ┣↓┫ keys to se-
lect P REGISTER .
P REGISTER
5. Press the ┣CASH┫ key to confirm
the input.