Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 96 All Rights Reserved!
6.23 Programming clerk PLUs
A maximum of 80 clerk PLUs can be programmed.
Clerk PLUs are PLUs which have already been programmed (see Chapter 6.5) whose sale/revenue is automatically
saved in the system for all clerks and printed later in a X/Z clerk PLU report when the PLU has been defined as a clerk
PLU beforehand. This provides a quick view as to which clerks have sold more or less of an item compared to other
clerks.
Example: PLU no. 22 should be defined as a clerk PLU. This programming should be assigned to memory location 3.
Input Display
CLERK –PLU 1 0
1. Set the key to PRG.
2. Select programming number
20 (see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the input.
The first clerk appears in the display.

[ ] Plu
CLERK –PLU 3 0
4. If necessary, use the ┣CASH┫ key
to select the required memory
location (1 to 60).
2x

[ ] Plu
5. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] Plu input area.

[ ] Plu
6. Use the numeric keyboard to en-
ter the PLU number, e.g. 22.

[ 22] Plu
7. Press the ┣CASH┫ key to confirm
the input.

[ 22] Plu
8. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
