Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 98 All Rights Reserved!
6.24.2 Programming the RS 232 port
Example: The RS 232 port is set-up for the connection of the Olympia/SERD TH 200 kitchen printer with a baud rate
of 19.200 baud, for a data length of 7 bit, no parity and with 2 stop bits: status number 1 = 2, status number
2 = 20, status number 3 = 01.
Input Display
COM PORT 1- 1=
1. Set the key to PRG.
2. Select programming num-
ber 23 (see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the input.

COM-PORTA RS232
[0 ] CONNECTION
[11] BAUNTR-DATALEN
[00] PARITY-STOPB
Note: Press the ┣CASH┫ key to switch between the 5 different
ports. Only the RS 232 port assigned to the first slot can be
programmed.
4. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] CONNECTION
input area.

[ 0 ] CONNECTION
5. Use the numeric keyboard to en-
ter the 1-digit status number 1,
e.g. 2.

[ 2 ] CONNECTION
6. Press the ┣CASH┫ key to confirm
the input.

Save...!!
Please Continue...
7. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] BAUNTR-
DATALEN input area.

[ 11 ] BAUNTR-DATALEN
8. Use the numeric keyboard to en-
ter the 2-digit status number 2,
e.g. 20.

[ 20 ] BAUNTR-DATALEN
9. Press the ┣CASH┫ key to confirm
the input.

Save...!!
Please Continue...
10. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] PARITY-STOPB
input area.

[ 00] PARITY-STOPB
11. Use the numeric keyboard to en-
ter the 2-digit status number 3,
e.g. 01.

[ 01 ] PARITY-STOPB
12. Press the ┣CASH┫ key to confirm
the input.

Save...!!
Please Continue...
13. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
