Operation Manual
Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 122 All Rights Reserved!
6.36 Programming the decimal point / decimal places
You can define to how many decimal places the cash register should operate:
Appearance in display and receipt printout No. of decimal places
1 0
1.0 1
1.00 2
1.000 3
1.000.00 (USA) 4
Note: The default setting is two decimal places.
Example: The cash register should operate to three decimal places.
Input Display
=DECIMAL POINT - 1=
1. Set the key to PRG.
2. Select programming number 48
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the input.
[2 ]
4. Enter the number of decimal
places required using the digit
keys.
[3 ]
5. Save the programmed data by
pressing the ┣CASH┫ key.
Save...!!
Please Continue...
6. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.