Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF

Olympia

9 Training Mode

Activate Training mode to practice using the cash register.

It is important to activate Training mode when practising to ensure the actual sales figures are not falsified. When Training

mode is active, all the operating functions can be accessed, the difference to Registration mode being that the entries and

transactions are not recorded in the cash register reports.

Important: Please observe the information provided at the beginning of Chapter 11 regarding your obligations in respect

of providing proof and preserving records for the revenue authorities!

Note: To switch Training mode on and off, the ┣Training┫ key is required. This must first be set-up on the keyboard

(see Chapter 6.33).

9.1 Activating Training mode

1. Set the key to REG.

Display

2. Press the ┣Training┫

key.

PASS CODE

3. Enter the current pass

code (default setting:

000000).

******

4. Press the ┣CASH┫ key.

17-06-2012 10:00:00

0.00

Note: If Training mode is switched on, a "T" appears in the display.

Note: Within the scope of programming the clerk system (see Chapter 6.9), the clerk rights feature can be used to

define which clerks may use Training mode. In order for the clerk rights to take effect, the clerk system must be

activated (see Chapter 6.9.3).

Note: If the clerk system is deactivated by means of system option 3, a pass code must be entered to switch Training

mode on.

Note: You can reprogramme the 6-digit training pass code (see Chapter 6.15).