Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 63 All Rights Reserved!
6.7.4 Deleting a LINK PLU
1. Set the key to PRG.
2. Select programme number 04 (see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm the input.
4. Use the ┣↑┫ and ┣↓┫ keys to move to the input area for the LINK PLU number.
5. Enter the number of the LINK PLU to be deleted.
6. Use the ┣↑┫ and ┣↓┫ keys to select Please Continue...…
7. Press the ┣CASH┫ key to confirm the input.
8. Continue the deleting process by pressing the ┣CASH┫ key or cancel the process by
pressing the ┣SUB-TOTAL┫ key.
6.7.5 Programming LINK PLUs using the PC
In order to programme LINK PLUs using the PC programme, OLYMPIA ECR System provides the following input mask.
The way to use the mask is described in Chapter 5, in detail in Chapter 5.5.
Fig. 15
Important: *** After data has been transferred, the software requires the cash register is switched off briefly! ***