Operation Manual

Settings
OPERATING
INSTRUCTIONS
16Page
www.olympia-business.de
Entering/Editing Handset Names
It is possible to assign a name to the handset. This name then always
appears when the telephone is in Standby mode.
1. Press the F button.
2. Use the G and M buttons to navigate to the HANDSET menu
option.
3. Press the F button.
4. Use the G and M buttons to navigate to the HANDSET NAME
menu option.
5. Press the F button.
6. Enter the required name for the handset.
7. Press the F button.
Note: To delete characters or digits, press the J button.To enter the
characters, press the relevant button the corresponding number of times,
1x, 2x, 3x or 4x, according to its position.
Keypad Beep
The keypad beep can be switched on or off.
1. Press the F button.
2. Use the G and M buttons to navigate to the HANDSET menu
option.
3. Press the F button.
4. Use the G and M buttons to navigate to the KEYPAD BEEP menu
option.
5. Press the F button.
6. Use the G and M buttons to navigate to the ON or OFF menu
option.
7. Press the F button.
Selecting the Base Station
If your handset is registered on several base stations, you can define which
base station you want to use.
1. Press the F button.
2. Use the G and M buttons to navigate to the HANDSET menu
option.
3. Press the F button.
4. Use the G and M buttons to navigate to the SELECT BASE menu
option.
5. Press the F button.
6. Use the G and M buttons to navigate to the AUTO or MANUAL
menu option.
7. Press the F button.
If you have selected MANUAL:
8. Use the G and M buttons to select a base station.
9. Press the F button.
Default Settings/Reset
1. Press the F button.
2. Use the G and M buttons to navigate to the HANDSET menu
option.
3. Press the F button.
4. Use the G and M buttons to navigate to the RESET menu option.
5. Press the F button.
6. Press the F button to confirm the operation or the I button to
cancel it.
7. Enter the 4−digit PIN.
8. Press the F button.