Page 1 ECR 650F _______________________Programming Instruction___________________________________ ____________________________________________________________ PROGRAMMING INSTRUCTION ELECTRONIC CASH REGISTER ECR 650F Version 3.01.02 2006 (Rev-C) 05.630 – 1040.
Page 2 ECR 650F _______________________Programming Instruction___________________________________ Table of contents: 1. 2. 3. 4. 5. Basic Feature System RESET, initialisation machine Key description, Default key layout S – Mode, Service Mode Operation Machine establishment dump (Initialize basic system) 4.1 System building dump – Memory set, Training 4.2 Keyboard program mode 4.3 Print out establishment S - Mode 4.4 PRG – Mode, Program Mode Operation Program Department 5.
Page 3 ECR 650F _______________________Programming Instruction___________________________________ 6. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Tracking print contents by „Ticket type“,“Order groups“, „Kitchen printer“ Management Reports. X-Report.Z-Report Character Table.
Page 4 ECR 650F _______________________Programming Instruction___________________________________ Numeric Display: Receipt nr. Waiter name or nr. 0024 Mr Meier Fußzeile Display : 1. MO 1. 2. 3. 4. 5. 6. 7. 8. 2. 23.10 3. 8:35 MO Date Time Keypad level Preisebene Bon-Ein PC-Display IRC 4. T0 5. P1 6. BON 7. PC 8. IRC The first letter of the day T0= basis, T1= 1. level, T2= 2. level. P1= Price level 1 , P2= Price level 2.
Page 5 ECR 650F _______________________Programming Instruction___________________________________ Clerk system: Prior to the operation entry the Clerk logs in via a Clerk key (standard 26 keys). This system can be affected in the PRG mode (i.e. it can be entirely turned off). A change of Clerk (i.e. key) is not feasible before the completion of the appropriate operation.
Page 6 ECR 650F _______________________Programming Instruction___________________________________ 2. SYSTEM RESET. INITIALISATION MACHINE. System Reset: If the Cash Register is turned on (with the 220V mains), subsequent disconnecting/connecting an internal standby lithium battery shall cause initialisation of the Cash Register and its memories, and start of the Cash Register. (All programmed data, sales, etc. … are deleted !!!!). The status is indicated by characters “CL” on the Cash Register display.
Page 7 ECR 650F _______________________Programming Instruction___________________________________ Procedure for a warmstart: ¾ Turn key to position OFF ¾ Disconnect Cash Register from the 220 V mains Keep the key [ %21 pressed and simultaneously connect the Cash Register to the 220V mains ¾ Characters SYSTEM RESET WARM START CONTINUE shall appear on display ¾ Release the key [ ¾ leave the key in the OFF position and go with the arrow key to WARM START ¾ press the [ &$6+ ] key the reset is finish
Page 8 ECR 650F _______________________Programming Instruction___________________________________ 3. KEY DESCRIPTION. DEFAULT KEY LAYOUT. [ 5(&(,37 )((' ] : Receipt feed [ 3/8 ] : Direct PLU [ 0,186] : Minus (Discount) [ 3/86 ] : Plus (Add On) [ (& ] [ &255(&7,21 ] : Used as VOID key last transaction item only (PLU, DEP,…) [ 92,' ] : Used as VOID key otherwise (PLU, DEP,…) [ 5(7851 ] : Return item [ 68%727$/ ] : Subtotal during transaction [ ; / 7,0( ] : Qty during sales.
Page 9 ECR 650F _______________________Programming Instruction___________________________________ [ 3$,' 287 ] : PO otherwise [ + %, - % ] : Add on, Discount - % (3 x 3) [ &/($5 ] : Clear entry [ &$6+ ] : Cash payment [ &+(&. ] [ &+$5*( ] [ &5(',7 ] : Payment key [ $.%.5. ] : Additional business receipt [ 1250$/ 35,17 ] : Tracking movement is not done [ 7$; 1 2 ] [ 7$.( 287 ] : TAX may be programming. Change of TAX. [ &$6+,(5] : Cashier entry – ID Code [ &/(5.
Page 10 ECR 650F _______________________Programming Instruction___________________________________ Default key layout (ECR 650F) – Basic Level: REC. FEED PLU 15 PLU 23 PLU 31 PLU 39 PLU 47 PLU 55 PLU 63 PLU 71 Dep. 5 Keyb. level Cooking code R/A P/O Ticket On / Off PLU 7 PLU 14 PLU 22 PLU 30 PLU 38 PLU 46 PLU 54 PLU 62 PLU 70 Dep. 4 Separate A.B.R. %+ %- ▲ ▬ PLU 6 PLU 13 PLU 21 PLU 29 PLU 37 PLU 45 PLU 53 PLU 61 PLU 69 Dep.
Page 11 ECR 650F _______________________Programming Instruction___________________________________ Default key layout (ECR 650F) – 2. Level: REC.
Page 12 ECR 650F _______________________Programming Instruction___________________________________ 4. S – MODE. SERVICE MODE OPERATION. Programming in S-mode (service) refers to the basic setting of Cash Register and to keyboard programming. When programming the basic setting of Cash Register (NN=01), a complete initialisation of Cash Register memory (i.e. its deletion and dynamic memory building) always occurs. 4.
Page 13 ECR 650F _______________________Programming Instruction___________________________________ Note: Surcharge / discount after the subtotal, i.e. of the whole sales slip, are calculated accurately, the total sum will be subsequently rounded according to the setting and surcharge / discount are calculated backward. When rounding the VAT, the VAT base is being rounded, i.e.
Page 14 ECR 650F _______________________Programming Instruction___________________________________ Example: S-mode: [ # / .9 ] [ &$6+ ] [ &$6+ ] [ &$6+ ] [ &$6+ ] [ &$6+ ] [ &$6+ ] [ &$6+ ] [ &$6+ ] Confirmation of memory allocation [ # / .
Page 15 ECR 650F _______________________Programming Instruction___________________________________ Beispiel: For the PLU nr. 22, the value is 3 and the code is the PLU nr. 022 (3 figure) Entry: 1033 [FD6+] For the function key FREE the value is 10 and the code 33 see the table under 4.3 End of Programming [ # / .
Page 16 ECR 650F _______________________Programming Instruction___________________________________ Example: S-mode: (Programming of function key no. 20 in the keyboard basic level) [ # / .9 ] Press the [ Desired Key ] which is to be programmed. Enter the VALUE and the CODE and press [ # / .9 ] Example: (Programing of key PLU 20 in the keyboard basic level) S-mode: [ # / .9 ] Press the [ Desired Key ] which is to be programmed.
Page 17 ECR 650F _______________________Programming Instruction___________________________________ 4.4 Print out establishment S - Mode S-Mode: [ 12 6$/( ] Scrolling: Start printout: VALUE = 01 System building dump M/C#0000 CLERK#01 with the[ VALUE = 10 Machine establishment dump M/C#0000 CLERK#01 CASHIER#01 90 DECIMAL POINT: ROUNDING: ROUNDING TAX: DATE FORMAT: AUTO CUTTER: MODE - NORMAL 2 1 2 0 0 12:00 02-01-2003 12:00 VALUE = 21 Key assign – 1.
Page 18 ECR 650F _______________________Programming Instruction___________________________________ 5. PRG – MODE. PROGRAM MODE OPERATION. Programming in the PRG-mode refers to programming of Cash Register features; for programming basic data (DEP, Account Items, TAT,...), features of X, Z – Reports and others as per individual sections, see below. General programming procedure: Key turned to PRG mode: The cash desk display shows all programme sections.
Page 19 ECR 650F _______________________Programming Instruction___________________________________ 5.1Program Department (SECTION 01) PRG-Mode: [ 12 6$/( ] 1. Scroll: using the cursor keys line (on the display screen up-down) 2. Scroll: using the cursor keys page (by entry e.g.WG1,WG2,WG3, etc.) Entry programme value: [ &$6+] VALUE or TEXT [12 6$/(] End programming of the respective section Structure Department: Field Record Num. VALUE max. 18 character ASCII max. 0 – 99999999 max.
Page 20 ECR 650F _______________________Programming Instruction___________________________________ Example: (to program DEP4, name:STEAK, price:23.50, TAX:1, status:00) PRG-Mode: 2X [ 12 6$/( ] Key page down 67($. [ &$6+ ] [ &$6+ ] [ &$6+ ] [ &$6+ ] [ &$6+ ] [ &$6+ ] [ &$6+ ] [ &$6+ ] Start programming Section Jump to entry WG # 3 store caption for DEP store Price1 skip Price2 store TAX#1 skip field „Department group#“ skip field „HALO/LALO“ skip field „Not use“ store Status ….
Page 21 ECR 650F _______________________Programming Instruction___________________________________ 5.3 Program PLU (SECTION 03) PRG-Mode: [ 12 6$/( ] [ &$6+ ] choice / new PLU (NUMBER PLU/EAN#) 1. scroll using the the cursor keys line-up, line-down 2. scroll using the cursor keys page (possibility) [ 92,' ] entry prg. value VALUE (on the display screen up down) (by entry e.g. PLU1,PLU2,PLU3, etc.) (delete current PLU and proceeded to next PLU) [ &$6+ ] [ # / .
Page 22 ECR 650F _______________________Programming Instruction___________________________________ GG = number of group PLU (0 – 99) I = status PLU (0 – 11) HL = H L 0 1 2 3 4 5 10 11 : : : : : : : : standard PLU, fixed price negative PLU, fixed price galon PLU, open price galon PLU, negative, open price standard PLU, open price negative PLU, open price scale, standard PLU, fixed price scale, negative PLU, fixed price = High Amount Lock Out (0 – 7) = Low Amount Lock Out (0 – 7) H 0 1 2 3 4 5 6
Page 23 ECR 650F _______________________Programming Instruction___________________________________ Structure Link PLU: Field 1: Name 2: Price 1 3: Price 2 4: TAX# 5: Group PLU# 6: Link Department# 7: Status 8: Stock counter Record Num. 01-50 : Link PLU# TT = set TAX include rate 00 01 02 08 GG = number group PLU (0 – 99) I = status PLU (0 – 1) Note: VALUE Max. 18 character ASCII max. 0 – 99999999 max.
Page 24 ECR 650F _______________________Programming Instruction___________________________________ 5.6 Program Clerk (SECTION 06) PRG-Mode: [ 12 6$/( ] 1. Scroll: using the cursor keys line-up, line-down (on the display screen up down) 2. Scroll: using the curor keys page entry prg. value (by entry e.g. waiter 1, waiter 2, etc.
Page 25 ECR 650F _______________________Programming Instruction___________________________________ S1S2 S3S4 = = status (Clerk Rights) CODE “S1” Prohibit „RETURN“ Prohibit „VOID“, „EC“ Prohibit „NO SALE“ 0 CODE “S2” Prohibit X – Reports (Training) Prohibit Z - Reports Prohibit PO entry 0 1 [ 2 3 [ [ [ 4 5 [ [ 1 [ 2 3 4 7 [ [ [ [ [ [ 5 [ [ [ [ 6 [ [ 4 5 [ [ [ 6 7 [ [ [ [ [ status (Clerk Rights) CODE “S3” Prohibit Z – Reports accum.
Page 26 ECR 650F _______________________Programming Instruction___________________________________ 5.7 5.8 Program Cashier (SECTION 07) PRG-Mode: [ 12 6$/( ] 1. Scroll: using the cursor keys line-up/down (on the display screen up down) 2. Scroll: using the cursor keys page (by entry e.g. waiter 1, waiter 2, etc.) entry prg. value [ &$6+ ] VALUE [ 12 6$/( ] end programming Section Structure Cashier: Field Record Num.
Page 27 ECR 650F _______________________Programming Instruction___________________________________ Structure Tender media: Field Record Num. 1: Name 2: HALO/LALO 3: Status 4: Not use 01-30 : T.MED # = H L H 0 1 2 3 4 5 6 7 S1S2 5.10 max.
Page 28 ECR 650F _______________________Programming Instruction___________________________________ Structure: Record Num. 01: Surcharge __________________ 02: Discount Field 1: Price 2: HALO __________________________ 1: Price 2: HALO 01 02 = = + KEY = surcharge (total) - KEY = discount (total) HL = H = High Amount Lock Out (0 – 7) H 0 1 2 3 4 5 6 7 5.
Page 29 ECR 650F _______________________Programming Instruction___________________________________ 5.12 Program Manager pass code (SECTION 11) PRG-Mode: [ 12 6$/( ] Scroll: using the cursor keys line-up/down entry prg. value (on the display screen up down) [ &$6+ ] VALUE [ 12 6$/( ] end programming Section Structure: Field Record Num. 01-02 : Pass Code# VALUE 1: Z-Mode pass code 2: S,PRG-Mode pass code Note: Values 0000 indicate an entry with no PASSWORD 5.
Page 30 ECR 650F _______________________Programming Instruction___________________________________ Structure P-Register: Field Record Num.
Page 31 ECR 650F _______________________Programming Instruction___________________________________ REGISTER P-04: CODE “M7” Zero skip printing Z-Reports Print copy receipt (Invoice) issuing +%/-% results included at DEP,PLU when SUBTOTAL use only 0 1 2 3 4 5 6 7 [ [ [ [ [ [ [ [ [ [ [ [ CODE “M8” 12hr indication on receipt 0 1 2 3 4 5 6 7 [ [ [ Compulsory to input clerk at each transaction +%/-% results included at DEP,PLU item only, SUBTOTAL not possible [ [ [ [ [ [ [ [ [ REGISTER P-0
Page 32 ECR 650F _______________________Programming Instruction___________________________________ REGISTER P-09: CODE “M17” Open Track in transaction require Print Orders at internal printer Print Kitchen order at internal printer always, only 0 1 2 3 4 5 6 7 [ [ [ [ CODE “M18” Enable Kitchen printer [ [ Enable GCP printer [ [ Print Kitchen order at internal printer when indicate error external [ [ [ [ 0 1 2 3 4 5 6 7 [ [ [ [ [ [ [ [ [ [ [ [ REGISTER P-10: CODE “M19” Check opened Tr
Page 33 ECR 650F _______________________Programming Instruction___________________________________ NEW REGISTER P-14 CODE “M27" 0 1 2 3 4 5 6 7 [ Single item link plu (650/652) Enable wind motor (360/362) Print journal in small print-652 Print journal in small print360/362 [ [ [ [ Print order in small print 652 Print order in small print 360362 5.
Page 34 ECR 650F _______________________Programming Instruction___________________________________ 5.17 Program Currency – FC (SECTION 16) PRG-Mode: choice FC [ 12 6$/( ] [ 12 6$/( ] (FC#) 1. Scroll using the cursor keys line-up, line-down (by currency entries) 2. Scroll using the cursor keys page (by the position of a currency) entry prg. value [ &$6+ ] VALUE [ 12 6$/( ] end programming Section Structure FC: Field Record Num. VALUE 1: Name 2: Status 3: Rate 01-04 : FC# max.
Page 35 ECR 650F _______________________Programming Instruction___________________________________ 5.19 Program P-Register (Report print item) (SECTION 18) PRG-Mode: [ 12 6$/( ] choice register (P- REGISTER#) using the cursor keys line-up, line-down step operation [ &$6+ ] (by records) entry prg. value [ &$6+ ] VALUE [ 12 6$/( ] end programming Section Structure P-Register: Field Record Num.
Page 36 ECR 650F _______________________Programming Instruction___________________________________ 5.20 Program P-Register (Double height line) (SECTION 19) PRG-Mode: [ 12 6$/( ] choice register (P- REGISTER#) using the cursor keys line-up, line-down step operation [ &$6+ ] (by records) entry prg. value [ &$6+ ] VALUE [ 12 6$/( ] end programming Section Structure P-Register: Field Record Num.
Page 37 ECR 650F _______________________Programming Instruction___________________________________ REGISTER P-01: CODE “M1” Print machine no.
Page 38 ECR 650F _______________________Programming Instruction___________________________________ Bon-sample 5.21 Program Terminal Number – IRC, PC (SECTION 21) PRG-Mode: entry prg. value [ 12 6$/( ] [ &$6+ ] VALUE PRG TERMINAL NUM. IRC [ 01 ] 01 - 01 10.10.2004 [ 12 6$/( ] end programming Section Structure: Field Record Num.
Page 39 ECR 650F _______________________Programming Instruction___________________________________ Structure port: Field Record Num.
Page 40 ECR 650F _______________________Programming Instruction___________________________________ 5.23 Programming the machine text (SECTION 24) In this section area, you can change the machine text, only possible in the PC programme 5.24 Program TAX (VAT) (SECTION 30) PRG-Mode: [ 12 6$/( ] choice TAX item [ 12 6$/( ] (TAX#) 1. Scroll: using the cursor keys line-up, line-down (by the V.A.T. entries) 2. Scroll: using the cursor keys page entry prg. value (by the positions of a V.A.T.
Page 41 ECR 650F _______________________Programming Instruction___________________________________ 5.26 Program AD message (SECTION 32) PRG-Mode: 1. Scroll: [ 12 6$/( ] using the cursor keys line-up, line-down entry prg. value [ &$6+ ] VALUE [ 12 6$/( ] end programming Section Structure: Field Record Num. 01 - 5: LINE# 06:LINE # VALUE 1: Caption TEXT „ INVOICE“ max.
Page 42 ECR 650F _______________________Programming Instruction___________________________________ 5.28 Program Cooking message (SECTION 40) PRG-Mode: [ 12 6$/( ] choice cooking (MESSAGE#) 1.scroll: using the cursor keys line-up, line-down (by the entries of the message entrys) 2.scroll: using the cursor keys page (by the position of a message) entry prg. value [ &$6+ ] VALUE [ 12 6$/( ] end programming Section Structure massage: Field Record Num.
Page 43 ECR 650F _______________________Programming Instruction___________________________________ 5.30 Program Logo message for SLIP printer (GCP) (SECTION 42) PRG-Mode: Scroll: [ 12 6$/( ] using the cursor keys line-up, line-down entry prg. value [ &$6+ ] VALUE [ 12 6$/( ] end programming Section Structure: Field Record Num. VALUE 1: Captione 01 – 4: LINE# max. 48 character ASCII 5.31 Program Kitchen files – Kitchen printers (SECTION 43) PRG-Mode: [ 12 6$/( ] choice kit.
Page 44 ECR 650F _______________________Programming Instruction___________________________________ [ 12 6$/( ] PRG-Mode: 1. The display shows a combination list with 16 X items 2. Confirm with [ &$6+ 3. ] key End programming with [12 6$/(] key 4. The group list is automatically requested and the group number is entered in the list Now the Cash Register prints out an IRC configuration, i.e.
Page 45 ECR 650F _______________________Programming Instruction___________________________________ 5.34 STOCK – PLU, LINK PLU STOCK COUNTER ADJUSTMENT Addition of inventory stock: X-Modus: X-Mode: All reports are shown in the display, enter 97, press the [ .9 ] key and use the cursor keys image/page up – down to go to the item stock indicator. Confirm with the [ &$6+ ] key, PLU-stock is shown, confirm with the [&$6+] key 1. All PLUs are shown, using the cursor keys line up/down, go to the required PLU.
Page 46 ECR 650F _______________________Programming Instruction___________________________________ 5.35 Program Waiter Rights (SECTION 17) This section range can be used to modify waiter rights.
Page 47 ECR 650F _______________________Programming Instruction___________________________________ 5.36 Program Report Link Macro (SECTION 31) S-mode [# / 16 ] Display ECR 650F/652F 31 Key Links 1,2 X/Z ECR 360/362 Macro key 1 "X" mode [XXXXXXXXXXXXXXXX] 31 [#/16] Macro key 2 "X" mode XXXXXXXXXXXXXXXX 32 [#/16] Macro key 1 "Z" mode XXXXXXXXXXXXXXXX 33 [#/16] XXXXXXXXXXXXXXXX Macro key 2 "Z" mode 34 [#/16] Up to 16 key sequences can be programmed per macro key in "X" or "Z" mode.
Page 48 ECR 650F _______________________Programming Instruction___________________________________ Programming code: 0–9 Enter numbers Enter the two-digit report number. *a Line up *b Line down *c Cash "X" mode once: display report; twice: print report "Z" mode once: print report *d Cut paper Paper is cut after printing report Continue with the next report number *e No sale *f End of macro link Example: You want to program linked reports.
Page 49 ECR 650F _______________________Programming Instruction___________________________________ 6. Tracking print contents by „Ticket type“,“Order groups“, „Kitchen printer“ The order system can be activated in the programming section of the ECR using the PRG – control key setting. Programming section (01) Department group = Ticket type 6 or 7 1.System (Ticket type) Type 6 – Ticket/consolidated. The ticket is printed upon closing of table. Type 7 – Ticket/normal.
Page 50 ECR 650F _______________________Programming Instruction___________________________________ 2.System (Order groups) The order-system can be activated in the programming-section of the ECR using the PRG – control key setting. Programming-section (01) Department groups = ticket type 4 Programming-section (03) PLU = (column 14) Order-groups 10-9 If the Order group 00 is set it will not be printed. This order-system enables printing with internal printer according to the set parameters possible.
Page 51 ECR 650F _______________________Programming Instruction___________________________________ 3.System (Kitchen printer) The ordering-system can be activated in the programming-section of the ECR using the PRG – control key setting. The system will allow up to eight different KP# tickets. The following ticket types are possible on an external kitchen printer.
Page 52 ECR 650F _______________________Programming Instruction___________________________________ # 06 = single ticket without consolidated ticket, similar items using only single ticket. TRACK# 001 1 KP#6 PLU 101 02-01-2003 2-10 000434 CLERK 01 ---------------------CUT-------------------------TRACK# 001 2 KP#6 PLU 102 02-01-2003 2-10 000435 CLERK 01 # 07 = single ticket + consolidated ticket, similar items using single ticket.
Page 53 ECR 650F _______________________Programming Instruction___________________________________ # 08 = single ticket without consolidated ticket, similar items using single ticket TRACK# 001 1 KP#8 PLU 101 02-01-2003 2-10 000434 CLERK 01 ---------------------CUT-------------------------TRACK# 001 1 KP#8 PLU 102 02-01-2003 2-10 000435 CLERK 01 ---------------------CUT-------------------------TRACK# 001 1 KP#8 PLU 102 02-01-2003 2-10 000436 CLERK01 The Text for the KP# can be programmed in the pr
Page 54 ECR 650F _______________________Programming Instruction___________________________________ Table of Reports: REPORT - DETAIL KEY SEQUENCE MODE Financial Report Day X/Z 01 [CASH] Financial Report Accumulative X/Z 02 [CASH] Department Group Report Day X/Z 15 [CASH] (On case Z-Mode Report „03“deleted in time) Department Group Report Accumulative X/Z 16 [CASH] (On case Z-Mode Report „04“deleted in time) Group PLU Report Day X/Z 17 [CASH] (On case Z-Mode Report „05“deleted in time) G
Page 55 ECR 650F _______________________Programming Instruction___________________________________ PLU Clerk sale Report Day X/Z 07 [CASH] Clerk Report Day X/Z 08 [CASH] (starting clerk#) [#/NO SALE] (ending clerk#) [#/NO SALE] 08 [CASH] Clerk range Report Day Clerk Report Accumulative X X/Z Clerk range Report Accumulative Cashier Report Day Cashier Report Accumulative Cashier range Report Accumulative Hourly Report (starting clerk #) [#/NO SALE] (ending clerk #) [#/NO SALE] 09 [CASH] X X/Z Cash
Page 56 ECR 650F _______________________Programming Instruction___________________________________ NOTE The electronic journal can only be deleted on the cash desk if the ‚electronic journal’ item of the machine options is not active. 9. CHARACTER TABLE. ALPHABET KEY LAYOUT FOR CAPTION.
Page 57 ECR 650F _______________________Programming Instruction___________________________________ Keys – indicate individual characters A, B, C, D, ...... Key “ws” = bold character, e.g. bold character “A” is entered by pressing the keys: ...... :6 $ Key „SPACE“ = space Keys *A,*B,*C,*D,*E indicate keys for entry of character codes in HEX. system, e.g. “m” = *A *B *C *D *E *F Q W E R T Z U I O A S D F G H J K L Y X C V B N M space space space space ws Ä Ö Ü , .
Page 58 ECR 650F _______________________Programming Instruction___________________________________ 10.
Page 59 ECR 650F _______________________Programming Instruction___________________________________ Receipt paper end Error: Alpha display INTERNAL PRINTER PAPER FEED OUT E 22 INTERNAL PRINTER HEAD OPEN E 23 Receipt Head up Error: Alpha display Code compulsory Error (Tender): Alpha display CODE REQ E 32 St compulsory Error (Tender): Alpha display SUB–TL REQ E 33 AMOUNT REQ E 34 DRW E 35 At compulsory Error: Alpha display Drawer open Error: Alpha display OPEN FC# request Error: Alpha displ
Page 60 ECR 650F _______________________Programming Instruction___________________________________ Track full (Bill buffer full, item sale) Error: Alpha display TRACK FULL ITEM SAVE E 42 Track full (Bill buffer full, item not sell) Error: Alpha display TRACK FULL E 43 Cooking message compulsory Error: Alpha display COOK REQ E 44 Clerk ID Error: Alpha display CLERK ID ERROR E 45 Ticket Type Error: Alpha display REC TYPE E 46 Electric Journal full Error: Alpha display ELE–J WARN E 80 DON
Page 61 ECR 650F _______________________Programming Instruction___________________________________ GCP status Error: Alpha display GCP STATUS GCP communication Error: Alpha display GCP ERROR
Page 62 ECR 650F _______________________Programming Instruction___________________________________ 11.
Page 63 ECR 650F _______________________Programming Instruction___________________________________ 12. INSTRUCTIONS FOR SERD-MANAGER / SERD-HELPER Installation The Data-CD contains a folder named SERD Manager / SERD Helper. Open this folder and doppel click on < Setup Manager > to install the computer program. Follow the instructions on the screen. The SERD Manager automatically copies an icon to the Desktop. You can start the SERD Manager using this icon on the Desktop or using Start/Programs.
Page 64 ECR 650F _______________________Programming Instruction___________________________________ 13. SERVICE-PROGRAMM im „S“ MODE START Program with: 1. Plug out the Mains plug 2. Set the key position on the cash register to “S“ 3. Plug in the Mains plug 4. Scroll with the Keys [3DJH 8S] and [5(&(,37 21 2))] Back with [=:] Key. Screen display in service mode: 1. LOAD FLASH MEMORY : 2. FACTORY TEST : 3.
Page 65 ECR 650F _______________________Programming Instruction___________________________________ 14. FLASH-PROGRAM You can use this to transfer new firmware to the cash register, exchanging an e-prom is therefore no longer necessary. This programme can only be run by a SERD-specialized dealer in the SERD Manager. 1. Pull the mains cable 2. Set the key position on the cash register to “S” 3. Plug in the mains cable. 4.
Page 66 ECR 650F _______________________Programming Instruction___________________________________ 15. Modem for telecommunication with the cash register Use an analogue standard modem (e.g. ACER 56 surf) Installation: - Connect the modem to a Com port on your computer. - On your desktop (PC), click on the icon “SERD Manager“ or “SERD Helper“ - Select “Properties” with the left mouse button.
Page 67 ECR 650F _______________________Programming Instruction___________________________________ 16. CONNECTION: SCANNER Tested Scanners are from the companies METROLOGIC, models ORBIT und VOYAGER Adjust the scanner by scanning the data sheet. 1. If the scanner is connected to the cash register, the Sanyo ID Code is also scanned in. 2.If the scanner is connected to the PC, then the Sanyo ID Code is left out. Add an ARTICLE: Programme an article on the PC using the scanner 1.
Page 68 ECR 650F _______________________Programming Instruction___________________________________ 17. CONNECTION GCP- receipt printer In the cash register programme section 23, the GCP printer model Epson TMU 295 is preset. Connect the GCP printer to the cash register port Com 4 = port D.
Page 69 ECR 650F _______________________Programming Instruction___________________________________ 18. Connecting the SPRINTER module to the cash register ECR 650F || The printers must have the following basic settings: ( serial Interface) Baut rate Data Lenght Parity Flow control Low Power Mode 9600 BPS 8 bit Non X on/X off ON KP-MODULE for the kitchen printer Connect the printer cable from the KP-MODULE to the kitchen printer 1.
Page 70 ECR 650F _______________________Programming Instruction___________________________________ Activate SPRINTER wireless module Connection to the power supply Before you connect the SPRINTER system to the power supply, the cash register and the printer should both be turned on. Plug the adapter into the powersocket. Then connect the adapter with the power supply connection on the module. A self-test starts automatically. The green LED and the red LED blink once.
Page 71 ECR 650F _______________________Programming Instruction___________________________________ ____________________________________________________________ Olympia Business Systems Vertriebs GmbH reservers alterations with regard to content and technical details. All given data are nominal values only. The described features and opinions can vary depending on country-specific requirements.
