Operation Manual

Page 38
ECR 650F _______________________Programming Instruction___________________________________
Bon-sample
5.21 Program Terminal Number – IRC, PC (SECTION 21)
PRG-Mode:
 [ 126$/( ]
entry prg. value VALUE
[ &$6+ ]
end programming Section
[ 126$/( ]
Structure:
Record Num.
Field
VALUE
01: NET ID CODE#
1: Terminal number IRC / PC 01 – 16
Note:
If you intend to communicate with the Cash Register via PC, or if it is linked in the IRC network, the Cash
Register must have a number. Then the Cash Register reports in the IRC network under this defined
number. Hence the number in the IRC network must be unique. The Cash Register name is automatically
allocated to the Cash Register number, see SECTION 33. After resetting the Cash Register, its number is
set to 00; i.e. this number should be used in SERD Manager in communication with Cash Register without
IRC network
5.22 Program COM port machine (SECTION 23)
PRG-Mode:
 [ 126$/( ]
choice COM port (COM port#)
[ 126$/( ]
1. single-step operation using the cursor keys line-up, line-down
(by records ports)
2. single-step operation using the cursor keys page (by items of one port)
entry prg. value VALUE
[ &$6+ ]
end programming Section
[ 126$/( ]
PRG
TERMINAL NUM. IRC 01 - 01
[ 01 ]
10.10.2004