Operation Manual
Page 44
ECR 650F _______________________Programming Instruction___________________________________
PRG-Mode:
[ 126$/( ]
1. The display shows a combination list with 16 X items
2. Confirm with
[ &$6+ ] key
3. End programming with
[126$/(] key
4. The group list is automatically requested and the group number is entered in the list
Now the Cash Register prints out an IRC configuration, i.e. it seeks ID codes of individual cash registers in the IRC
network and writes out which cash registers (their ID codes) are accessible. Simultaneously, it generates in its memory an
IRC configuration file used for its further operation in the IRC network. It also sends this file to all other accessible Cash
Registers. If another Cash Register is added to the Cash Register Network, or numbers of Cash Registers in IRC are
altered, it is always necessary to make an IRC configuration.
DISPLAY MASSAGE
5.33 Print out program dump report PRG-Mode (SECTION 90)
PRG-Mode:
[ 126$/( ]
1.All programme sections are displayed
2. Choose the section to be printed with the cursor keys:Image upwards,
image downwards or page-up, page-down
3. 3.Start the printout with the
[&$6+] Key
4. Cancel the printout with the
[&/5] delete key
5. After the end of the printout procedure [ # / .9 ]
Note:
If after selection of a programme section, a submunu appears, follow the instructions whcih appear on the display.
ICR CONFIGURATION
01 X X X X X X X
X X X X X X X X
01 NET ID CODE MASCHINE
[ 16 ] ECRs IN THE ICR NETWORK