Operation Manual

Page 5
ECR 650F _______________________Programming Instruction___________________________________
Clerk system:
Prior to the operation entry the Clerk logs in via a Clerk key (standard 26 keys). This system can be affected in the PRG
mode (i.e. it can be entirely turned off). A change of Clerk (i.e. key) is not feasible before the completion of the
appropriate operation. The system may be designed to eliminate (or to restrict) the system of keys and Cash Register
shall require log-in code - PASSWORD (not ID Code).
X X X
_ _ _ _ _ _ _ _ _ _
The Cash Register indicates on display a question for entering the PASSWORD. If the data (1 character) is entered, the
display is changed. (For example, when entering two characters ….)
*
X X
_ _ _ _ _ _ _ _ _ _
After all PASSWORD characters have been entered, the Clerk will be permitted to work. If the Cash Register displays a
character “0“, PASSWORD is not correct and entering can be repeated after pressing the key
[ &/($5 ].
Manager – System:
The Cash Register enables to program a secret entry “PASSWORD“ for manager allowing for an exclusive access to
operations in Z and PRG key positions or only to the operations in PRG position (i.e.. Z – reports, programming).
PASSWORD consists of four characters and the entry system is identical with the entry of Clerks’ PASSWORD.