Operating instructions

5 Operation

Note: The recommended capacities stipulated in Chapter “Technical Data” must

not be exceeded, otherwise material will jam! Do not forget that the thick-

ness of the paper increases when folded, as a result of which the recom-

mended sheet capacity can be exceeded. Also reduce the quantity of pa-

per when shredding coarse paper.

5.1 Switching the device on

● Set the On/Off switch to its ON position.

The green “power on” lamp lights up.

The device is ready to operate.

5.2 ECS function (automatic EcoShred operation)

When the ECS

function is activated, the shredding operation of the cutting mechanism

starts up automatically as soon as material is inserted in the respective infeed slot:

● The device switches to forward drive and draws the material in.

● 5 seconds after shredding is finished, the device switches off automatically.

The ECS function is activated by pressing the ECS button. The ECS button then lights up

blue.

Note: When the ECS function is activated, paper can be shredded via the paper

infeed and CDs, DVDs and credit cards shredded via the CD infeed. Only

one infeed may be used at a time. If you use more than one infeed, the

device stops. Pay attention to the permissible quantity of material which

can be shredded.

Note: When the ECS function is activated, the device has a very low power con-

sumption.

5.3 Shredding paper

Note: A maximum of 8 sheets of A4 paper with a weight of maximally 70 g/m

may be inserted in the paper infeed at a time.

Note: Remove any other material from the paper, such as paper clips or labels.

1. The device is switched on and the ECS function is activated.

2. Insert paper in the paper infeed.

Abbreviation for EcoShred