Operation Manual

A
A
REMAIN
14
B
A
C
D
Operation
42
When in Standby mode, press the
RECORD/STOP button. The LED
lights up red and the recording
timer appears. Speak into the inte-
grated microphone or connect an
external microphone to the MIC
jack and speak at a normal vol-
ume. Press the RECORD/STOP button again to end recording.
Press the PLAY/STOP button to
display the time remaining for re-
cording. REMAIN", together with
the remaining time for recording,
appear in the display.
Voice−activated recording (VOX)
When VOX" is activated, the device only records when you speak. If you
pause, the device interrupts recording and only resumes when you start
speaking again.
VOX" must be activated (refer to
activating/deactivating VOX" Page
40). Switch the device on and se-
lect the required recording quality
(refer to Page 38 Recording qual-
ity").
When the device is in Standby
mode, press the FILE/REP button
to select a file (A, B, C, D) in which
the message should be stored.