Operation Manual

MODE

FILE/REP ERASE

Operation

Press the RECORD/STOP button,

the recording icon lights up and the

time indicator for the current re-

cording appears. The LED lights

up red. Speak into the microphone

integrated or connect an external

microphone to the MIC jack. The

device begins to record the moment you start to speak. If recording is inter-

rupted, the red LED flashes until recording is resumed. Press the RECORD/

STOP button again to end recording.

NOTE:

 The first noises activate the recorder and it is possible they will not be

recorded.

 The device does not interrupt recording should the volume of the speaker

change.

 Recording is interrupted following 2 seconds silence.

 For information on continuous recording, refer to Page 41.

 A distance of approx. 10 cm from the device is considered reasonable for

recording at a normal volume (speaking).

Playing messages

Switch the device on, activate

Standby mode and press the FILE/

REP button to select a file (A, B,

C, D).

Press the UP or DOWN button to

select the required messages. The

message number and length ap-

pear in the display.