Operation Manual

Kapitel 3: Berichte
3-13
Klassifikation Code Beschreibung Alarm Ergebnis
B218 Packet that is not adaptable ON NG
to Status transition (Outgoing/incoming collision)
B219 Packet that is not adaptable to ON NG
Status transition (CQ packet)
B221 Unallowable packet (Packet type not clear) ON NG
B222 Unallowable packet ON NG
(Call by special incoming logic channel)
B226 Unallowable packet (Too short packet) ON NG
B227 Unallowable packet (Too long packet) ON NG
B229 Unallowable packet ON NG
(Restart packet in which LCN or LCQN is not 0)
B22A Unallowable packet ON NG
(Packet that is not adaptable to the facility)
B231 Timer time out (CA packet wait time out) ON NG
B232 Timer time out (CF packet wait time out) ON NG
B241 Call setting problem (unallowable facility code) ON NG
B242 Call setting problem ON NG
(unallowable facility parameter)
B243 Call setting problem (incoming address is invalid) ON NG
B244 Call setting problem (outgoing address is invalid) ON NG
B245 Call setting problem (invalid facility length) ON NG
B246 Call setting problem (call termination reject) ON NG
B247 Call setting problem (No empty logic channel) ON NG
B248 Call setting problem (outgoing/incoming collision) ON NG
B249 Call setting problem (overlapped facility request) ON NG
B24A Call setting problem (address length other than zero) ON NG
B24B Call setting problem (facility length other than zero) ON NG
Bch layer 4 B702 Reception TDT length over ON NG
B703 TDT length negotiation unsuccessful ON NG
B704 Invalid block received ON NG
B705 Abnormal parameter received ON NG
B706 Illegal block received ON NG
B707 TCR wait time out (T0.2 T.O) ON NG
B708 TCA wait time out (T1.1 T.O) ON NG
B709 Communication Interruption due to TCC reception ON NG
B70A Communication interruption due to TBR reception ON NG
Kap_3.p65 02.08.2000, 11:1813