Operation Manual

OL5815 User Manual 8
5 Installation and Charging of the Battery Pack
1. Open the battery compartment by sliding the cover down.
2. Plug the Battery Pack connector into the Handset battery socket. Place the battery pack and wires in the compartment.
3. Close the battery compartment.
4. You may change the face panel with one of the color options provided.
5. Choose the appropriate mounting bracket. One bracket is for desk or countertop installations (it has the 4 round
‘feet’). The other bracket is for wall mounting (it has slots for the studs on a telephone wall plate). You must use one
of these brackets. Thread the telephone cord and DC power cord through the opening in the chosen bracket, then
plug the two cords into the corresponding jacks on the bottom of the Base.
6. Snap the bracket into place on the back of the Base. If you are using the desktop bracket, run the two cords through
the channel at the back of the bracket. If you are wall mounting the Base, carefully line up the slots on the wall mount
bracket with the studs on the telephone wall plate, and carefully mount the telephone on the wall.
Desk mount bracket Wall mount bracket