Operation Manual

6.1 Transmission Methods

6-15

Fax Transmission/Reception Methods Chapter 6

5 Specify the relay station, and then

press the [Yes] key.

H Refer to “Dialing” on page 5-2.

A screen appears, allowing you to

specify the relay box ID.

6 Using the 10-Key Pad, enter the

relay box ID.

H Enter the relay box ID (20

digits or less) programmed at

the relay station.

H If you wish to correct the ID, press the [No] key, and then enter the new

number.

7 Press the [Yes] key.

A screen appears, allowing you to specify the password.

8 Using the 10-Key Pad, enter the

password.

H Enter the password (20 digits

or less) if a password has been

set at the relay station.

H If you wish to correct the password, press the [No] key, and then enter the

new number.

9 Press the [Start] key to begin scanning and sending the fax.