Operation Manual

7
7.1 Utility Mode
7-2
Using the Utility Mode Chapter 7
7.1 Utility Mode
There are fifteen menus in the Utility mode.
No. Name Description
1 MACHINE SETTING Used to specify settings for the machine’s operating environment.
2 PAPER SOURCE
SETUP
Used to specify the size and type of paper loaded in Tray1. In addition,
auto tray switching can be enabled for each tray.
3 USER MANAGEMENT Used to specify settings after the drum cartridge is replaced.
4 ADMIN.MANAGEMENT Used to specify setting for the administrator.
5 COPY SETTING Used to specify the default settings for each copy function.
6 FAX REGISTRATION Used to specify the default setting for each fax function.
7 TX OPERATION Used to specify the default setting for TX operation.
8 RX OPERATION Used to specify the default setting for RX operation.
9 COMM. SETTING Used to specify the default setting for communicating environment.
10 REPORTING Used to specify the default setting for each report function.
11 INITIAL USER DATA Used to specify setting for the initializing user data.
12 NETWORK SETTING Available only if the optional Network Interface Card is installed. For
details, refer to the User Manual for the Network Interface Card.
13 E-MAIL SETTING 1 Available only if the optional Internet Fax & Network Scan Kit is
installed. For details, refer to the User Manual for the Internet Fax &
Network Scan Kit.
14 E-MAIL SETTING 2
15 SCAN SETTING