Operation Manual

7.5 Specifying Administrative Settings (“ADMIN. MANAGEMENT” menu)
7
7-23
Using the Utility Mode Chapter 7
To select the “ADMIN. MANAGEMENT” menu
1 Press the [Utility] key four times.
“ADMIN. MANAGEMENT”
appears.
2 Press the [Yes] key.
3 From the 10-Key Pad, press the key ([1]) for the “ADMIN. MANAGEMENT”
function that you wish to set.
H The “ADMIN. MANAGEMENT” functions are as follows:
1 REMOTE MONITOR
4 Using the 10-Key Pad, enter the 6-
digit administrator access number,
and then press the [Yes] key.

Tip
If, at any time, you wish to quit setting an “ADMIN. MANAGEMENT” function,
press the [No] key. When the message “STOP SETTING?” appears, press the
[Yes] key to quit.