Operation Manual

7.7 Setting Up the Fax Registration

7-46

Using the Utility Mode Chapter 7

Specifying the Setting for “PROGRAM DIAL”

If one-touch dial keys have been programmed with fax numbers and a

transmission/reception function, that function can be carried out by pressing just the

corresponding one-touch dial key.

Transmission/reception functions that can be programmed:

G Broadcast transmission

G Timer transmission

G Mailbox transmission

G Polling reception

G Relay initiation transmission

To set program dialing

1 Select the “FAX REGISTRATION”.

H Refer to “Selecting the “FAX REGISTRATION” menu” on page 7-34.

2 Press the [4] key from the 10-Key

Pad to select “PROGRAM DIAL”.

3 Press the one-touch dial key ([12]

through [15]) programmed with the

desired function.

4 From the 10-Key Pad, press the

key ([1] through [3], [6] or [7]) for

the desired function.

H Functions that can be

selected:

1 BROADCAST

2 TIMER TX

3 MAILBOX TX

6 POLLING RX

7 RELAY INITIATE

5 Follow the instructions for the selected function.

H “To fax using broadcast transmission” on page 6-7

H “To fax using timer transmission” on page 6-10