Operation Manual

7.7 Setting Up the Fax Registration

7-47

Using the Utility Mode Chapter 7

H “To fax using mailbox transmission” on page 6-12

H “To fax using relay initiation transmission” on page 6-14

H “To receive a fax using polling reception” on page 6-23

The settings are registered.

6 To specify other program dialing settings, repeat steps 3 through 5.

7 Press the [No] key to finish

programming.

The “FAX REGISTRATION” menu

appears again.

To change/delete a programmed broadcast transmission

1 Select the “FAX REGISTRATION”.

H Refer to “Selecting the “FAX REGISTRATION” menu” on page 7-34.

2 Press the [4] key from the 10-Key

Pad to select “PROGRAM DIAL”.

3 Press the one-touch dial key ([12]

through [15]) programmed with the

broadcast transmission that you

wish to change or delete.

4 Press the [No] key.

5 Using the [ ] and [Ö ] keys, select

either “EDIT” or “DELETE”, and

then press the [Yes] key.

H If “EDIT” was selected, the

specified recipients are

displayed in order. (Continue with step 6.)

H If “DELETE” was selected, the program dialing settings are deleted and the

“SELECT REGIST.KEY” appears again.