Operation Manual

7
7.7 Setting Up the Fax Registration
7-52
Using the Utility Mode Chapter 7
6 To delete the displayed recipient,
press the [No] key.
To keep the displayed recipient,
press the [Yes] key.
H To add a recipient, in the
screen containing “Fin.=START”, specify a recipient using the one-touch
dial keys or the speed dial numbers, or by entering a fax number using the
10-Key Pad.
The next recipient is displayed.
7 When you are finished making
changes, press the [Start] key.
Other program dialing settings can
be changed.
8 Press the [No] key to return to the
“FAX REGISTRATION” menu.
To change/delete a programmed relay initiation transmission
1 Select the “FAX REGISTRATION”.
H Refer to “Selecting the “FAX REGISTRATION” menu” on page 7-34.
2 Press the [4] key from the 10-Key
Pad to select “PROGRAM DIAL”.
3 Press the one-touch dial key ([12]
through [15]) programmed with the
relay initiation transmission that
you wish to change or delete.
4 Press the [No] key.