Operation Manual

7.7 Setting Up the Fax Registration
7
7-55
Using the Utility Mode Chapter 7
4 Using the 10-Key Pad, enter the
desired transmission time, and
then press the [Yes] key.
5 Press the [No] key to return to the
“FAX REGISTRATION” menu.
To change the batch transmission setting
1 Select the “FAX REGISTRATION”.
H Refer to “Selecting the “FAX REGISTRATION” menu” on page 7-34.
2 Press the [5] key from the 10-Key
Pad to select “BATCH TX”.
3 Press the one-touch dial key
programmed with the batch
transmission setting that you wish
to change.
4 Press the [No] key, and then use
the 10-Key Pad to enter the new
transmission time.
5 When you are finished making
changes, press the [Yes] key.