Operation Manual

4.1 Making a Basic Copy
4
4-3
Making Copies Chapter 4
4 Specify the image density.
H “Adjusting the Image Density”
on page 4-12
5 Using the 10-Key Pad, enter the
number of copies to be made. Any
number from 1 to 99 can be
entered.
6 Press the [Start] key.
This will start the print cycle.
H To stop the print cycle in mid-
operation, press the [Stop]
key.
H To cancel the print job, press
the [No] key or the [Panel
Reset] key.
H To restart the print cycle, press
the [Start] key.