Operation Manual

5.1 Dialing

5-3

Faxing Chapter 5

§ If the machine is connected to a PBX line and the outside line access

number has been specified in the communication settings (p. 7-74), enter

“#” to dial the outside line access number automatically.

5 Press the [Start] key to begin scanning and sending the fax.

To fax using one-touch dialing

If one-touch dial keys have already been programmed with fax numbers, the fax

number of a recipient can be specified by pressing just the corresponding one-

touch dial key.

For details on programming the one-touch dial keys, refer to “Setting Up One-Touch

Dialing (“ONE-TOUCH DIAL” function)” on page 7-35.

1 Press the [Fax] key to enter Fax mode.

2 Load the document into the Automatic Document Feeder.

3 If necessary, change the “Resolution” setting (p. 5-11).

4 Press the one-touch dial key ([01] through [15]) programmed with the fax

number that you wish to send the fax to.

5 Press the [Start] key.

The machine automatically starts

scanning the document and

sending the fax.