Operation Manual

5.1 Dialing

5-7

Faxing Chapter 5

To fax using program dialing

If one-touch dial keys have already been programmed with fax numbers and a

transmission/reception function (such as timer transmission or polling reception),

that function can be carried out by pressing just the corresponding one-touch dial

key.

For details on setting program dialing, refer to “Specifying the Setting for

“PROGRAM DIAL”” on page 7-46.

1 Press the [Fax] key to enter Fax mode.

2 Load the document into the Automatic Document Feeder. (This step is not

necessary with polling reception.)

3 If necessary, change the “Resolution” setting (p. 5-11). (This step is not

necessary with polling reception.)

4 Press the one-touch dial key ([12]

through [15]) programmed with the

desired function.

5 Press the [Start] key.

The programmed function

automatically begins.



Tip

To cancel a timer transmission, select “CANCEL RESERV.” from the

“FUNCTION” menu (p. 6-19).