Operation Manual

Configuration
G
21
Remote Control
The  button on the remote control can be configured as an Emergency Call or Panic
button via the base unit.
Proceed as follows to configure the button:
1. Enter the Entry Code. Confirm it by pressing .
2. The menu is opened by pressing the Menu button  briefly.
3. Select the Remote Key menu option. Confirm it by pressing .
4. Use the  and  buttons to select the Remote: SOS or Re
mote: PANIC function.
5. Confirm it by pressing . The main menu reappears in the display.
6. Press  to exit from the menu.
Flood and Smoke Detectors
You can set-up the base unit so that flood and smoke detectors trigger an alarm when the
base unit is disarmed.
1. Enter the Entry Code. Confirm it by pressing .
2. The menu is opened by pressing the Menu button  briefly.
3. Select the Flood&Smoke menu option. Confirm it by pressing .
4. Use the  and  buttons to select Standard or Activate.
5. Confirm it by pressing . The main menu reappears in the display.
6. Press  to exit from the menu.
The table below indicates how the flood and smoke detectors are triggered according to the
various settings.
Standard Activate
Phone call Alarm signal Phone call Alarm signal
Disarmed
mode
No No Yes Yes
At Home mode No Yes No Yes
Silent mode Yes No Yes Yes
Alarm mode Yes Yes Yes Yes