Operation Manual

Smoke Detector RTX

Fig. 4

Intended Use

The RTX smoke detector serves for the detection of smoke indoors and to issue a

loud acoustic signal if it is detected. In addition, the RTX smoke detector sends a

radio signal which can be received by alarm systems from the Protect series. The

RTX smoke detector can also receive an alarm signal from the alarm system and

be activated by it in order to signal a smoke alarm.

A condition for complying with the intended use is that the equipment is installed

correctly and the information in this instruction manual is observed and main

tained.

Any other use is considered unintended use. Unauthorised modifications or recon

structions not described in this instruction manual are not permitted and could

cause the product to be damaged. Furthermore, risks through short-circuits, fire,

electric shock etc. cannot be ruled out.

Important Safety Information

 WARNING:

• Risk of suffocation!

Children could swallow small parts, packing materials or protective foil.

 Keep the product and packaging out of reach of children!

 CAUTION!

• Hearing damage through loud alarm signal!

The alarm signal is loud and could cause hearing damage.

 Only use the product in the recommended installation locations.

 Do not hold the product near your ears to test it.

Notes on Use

• Smoke detectors only monitor a restricted area! Therefore, install a sufficient

number of smoke detectors to ensure optimum protection.

• The smoke detector only works with properly charged, correctly installed batter

ies. The smoke detector must not be operated using rechargeable batteries.