Operation Manual

GSM Antenna
G
37
Please check the contents of the package carefully. If anything is missing or has
been damaged during transport, DO NOT put the GSM antenna into operation!
Installation
Installation Steps
Proceed as follows to assemble the GSM antenna:
1. Use a screwdriver to loosen the screw in the battery and connection socket
compartment on the underside of the base unit of the Protect 9XXX series alarm
system.
2. Remove the lid from the battery and connection socket compartment.
3. Insert the plug on the GSM antenna in the socket provided. Refer to Fig. 2.
4. Set the antenna switch to Ext. Refer to Fig. 3.
5. Replace the lid on the battery and connection socket compartment.
6. Tighten the screws using a screwdriver.
Technical Data
Weight: 48 g
Dimensions (height): 290 mm
Cable length: Approx. 3 m