Operation Manual

Accessory functions
36 Version no. 12-03E
2. Confirm by operating the -key, the LCD will display
[AUTO 1 2 3 4].
If only 2 base stations are registered, the LCD will display
[AUTO 1 2 _ _].
The current selection is constantly displayed while the others
indicate.
3. Operate the desired dial button to select a specific base
station and operate the -key to select AUTO.
The selected setting is constantly displayed while the others
indicate.
By operating the -key you confirm your selection and leave
the [SELECT BASE] menu.
7.4 Priorities for handset ringing sequence
The default setting is NO PRIORITY.
If more than one handset is connected to a base station, the
ringing sequence can be programmed.
1. Operate the -key to access the menu mode during
standby.
Operate the / -key to select [SYSTEM].
Confirm your selection with the -key.
Operate the / -keys to select [RING SEQ].
AUTO 12 _ _
OK
AUTO 12
OK
SYSTEM
OK
RING SEQ