Operation Manual

Version no. 12-03E 37
Accessory functions
2. Confirm your selection by operating the -key, the LCD will
display [HS: *], in which HS stands for handset and the "*"
shows there is no set priority.
Operate the dial button (1-6) to select the desired handset.
Operate [1], for example, to define that handset 1 is to ring
first.
3. Press to confirm and to return to standby mode.
Note:
• If the selected handset number was not yet registered, a
warning tone is emitted.
• The selected handset will ring first. If the talk was not
accepted after 2 ring tones, the other handsets start to ring.
HS: 1
OK
OK