R Internet Radio Receiver OPERATING INSTRUCTIONS 07.03.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exemption From Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Information on Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Firmware Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Introduction Exemption From Liability Important Safety Precautions We cannot guarantee that the information which relates to the technical properties of the product or to the product itself contained in this document is correct. The product and its accessories described in this document are subject to constant improvement and further development.
Installation Positioning the Equipment Installation Package Contents S S S S Position the equipment in an easily accessible location. Ensure that it is set down on a stable, level, non−slip surface. In addition, ensure that the equipment is positioned where all the necessary cables can be laid in such a way that nobody can trip over them. Do not cover the air vents and ensure a minimum clearance of 5 cm on all sides of the equipment.
Installation Connecting the Equipment Conditions / Connecting to Internet Check that the voltage specifications on the equipment matches that of the local power supply. Connect the power adapter plug to the radio receiver and the power socket. The equipment is now ready to be configured. The following conditions must be fulfilled in order to use the equipment: S There must be an internet access available with a high transmission speed.
Features Features Congratulations on having purchased this high quality equipment which is provided with the following features: S S S S S S S Reception of over 5000 radio stations worldwide S S S S S File sharing via Windows Media Connect function Supports on demand streaming Information on References to Software and Hardware The software and hardware referred to in this manual are registered trademarks and, as such, are subject to the provisions of law.
Features Glossary Wireless AP DHCP IP Address MAC Address WEP WPA SSID Gateway Wireless AP refers to a Wireless LAN Access Point. This is normally integrated in the router. Dynamic Host Configuration Protocol (DHCP) enables the dynamic assignment of an IP address in a network with the aid of a corresponding server or router. An IP address is a number which enables computers and other devices to be accessed within an IP network. It has four groups of numbers separated by a dot, e.g: 192.168.178.
Operating Elements and Indicators Operating Elements and Indicators 1 12 2 3 4 2, 3, 4 11 5 10 9 8 7 6 18 11 10 5 9 8 7 17 13 16 14 15 DC:9V 23 Page 6 22 21 20 19 www.olympia-vertrieb.
Operating Elements and Indicators 1 Display 1 Display 2 Button 2 Button [>>] Media Player Mode [>>] Internet Radio Mode 3 Button [SELECT], confirm selection 3 Button [SELECT], confirm selection 4 Button [>>] 4 Button [>>] 5 6 7 8 [BACK], return to previous menu Receiver for remote control [VOL+], volume control + [VOL−], volume control − 5 6 7 8 Button Sensor Button Button [BACK], return to previous menu Receiver for remote control [VOL+], volume control + [VOL−], volume control − [BROW
Network Network Integrating the Receiver in a Wi−Fi/WLAN Network The radio receiver must be integrated in a network with Internet access: 1. Press the [STANDBY/ON] button. Reciva Radio ARM Powered 2. The display changes after approx. 2 seconds. 5. The equipment automatically scans for Wi−Fi/WLAN networks. Load list of radio stations Scan for networks > Enter network Scanning Olympia network 9. If the network selected is encrypted, you are prompted to enter the corresponding code (key).
Network [>>] [>>] If you have entered an incorrect character, delete it by pressing the [BACK] button. / buttons to select the 5. Press the WIRED/WIRELESS menu option. 6. Confirm the selection by pressing the [SELECT] button. 7. Press the / to select the ONLY WIRED option. 8. Confirm the selection by pressing the [SELECT] button.
Radio Stations Radio Stations Selecting Radio Stations Stations Media Player > Sleep Timer Location Genre Selecting the LOCATION menu option enables you to select a geographical region and then a country from a list. A list of radio stations from the selected country is then displayed from which to select. Selecting the GENRE menu option enables you to filter radio stations available according to their broadcasting content. Example: classic, rock, sport, news, etc.
Radio Stations Storing and Assigning a Radio Station to a Preset Button [>>] [>>] Genre < Classic Rock > Sport 3. Press the / buttons to select the required radio station. 4. Confirm the selection by pressing the [SELECT] button. The radio then connects to this radio station. 5. The selected station is then played. It is possible to assign radio stations to Preset buttons and select them by pressing the respective Preset button assigned, [P1] to [P5].
Radio Stations On Demand Programmes Queries on New Radio Stations Some radio stations offer services. Certain radio stations, for example, enable you to select and hear programmes which have already been broadcast. After selecting a radio station, the radio does not start playing the broadcast immediately. If you want to listen to a particular radio station which is not currently available online, you can send a query via the Reciva internet page (http://www.reciva.com).
Settings 1. Press the [SELECT] button. [>>] Clock Various equipment settings can be adjusted according to individual requirements: OPERATING INSTRUCTIONS > > < Set Time 12:04 > < Set Date 01 Jan 2007 > 8. Press the / buttons to select the correct value for the hour. 9. Confirm the selection by pressing the [SELECT] button. < Language > < English > [>>] 5. Press the / buttons to select the required language. 6. Confirm the selection by pressing the [SELECT] button.
Media Player Configuring the PC Note: If you use the data sharing feature provided by Windows, the folder containing the relevant files must not be in the My Documents or My Music folders. These folders cannot be used to share files. The storage location is irrelevant when sharing files via a UPnP server. 1. Ensure that the PC is connected to the same network as the radio equipment. 3. Click with the right−hand mouse button on the folder. 4.
Media Player [>>] [>>] [>>] [>>] < By Album By Artist > / buttons to select the 5. Press the required album. 6. Confirm the selection by pressing the [SELECT] button. Note: The scan can take a few minutes if there are a lot of files in the folder. 13.When the scanning routine has been completed, you can sort the files. Press [>>] [>>] 1. Press the / buttons to select the BY ARTIST menu option. 2. Confirm the selection by pressing the [SELECT] button. 3.
Media Player < By Album By Artist Navigation in the current list 1. Press the [BROWSE] button to display the name of the track currently playing. 2. Press the the list. Track Added to Queue / [>>] [>>] [>>] Press the [Pre2] button to interrupt playback. Press the [Pre2] button again to resume playing the track. Press the [Pre5] button to stop playback. [>>] Page 16 > Press the [Pre3] button to select the next track in the play list. 3. Press the / buttons to select the required artist.
Media Player Adding a Track to the Play List Deleting All the Tracks in a Play List 4. Press the / buttons to select the CLEAR QUEUE menu option. [>>] < < Media Player > Clear Queue > 5. Confirm the selection by pressing the [SELECT] button. < Song 01 > < Song 15 > [>>] 2. Press the / buttons to select the track to be deleted. 3. Press and hold the [Pre5] button for 2 seconds. [>>] [>>] [>>] Track Added to Queue Deleting a Track From the Play List 1. Press the [BROWSE] button.
Media Player Playback Mode > < Shuffle > [>>] / buttons to select the 7. Press the REPEAT menu option. 8. Confirm the selection by pressing the [SELECT] button. [>>] < Media Player Playback Mode > > < Repeat > [>>] 8. Press the / button and select YES. To cancel the procedure, select NO. 9. Confirm the selection by pressing the [SELECT] button. 5. Press the / buttons to select the PLAYBACK menu option. 6. Confirm the selection by pressing the [SELECT] button. < [>>] 6.
Configuration Configuration Firmware Update Various additional functions can be adjusted according to individual requirements: This menu is used Press the / [>>] S S S S [>>] The same basic procedure is always used to navigate through the menus: buttons to select a menu option. Confirm the selection by pressing the [SELECT] button. If necessary, make other selections in a submenu. Confirm the selection by pressing the [SELECT] button.
Configuration Sleep Timer This menu is used S to define a period of time after which the radio automatically switches to Standby mode (off). After selecting this menu option, the “Sleep Timeout 00:00:00” (hours:minutes:seconds) message appears in the display. The maximum value which can be set here is 3 hours 00 minutes. The time can be set at 15−minute intervals. Note: To switch the radio equipment on again after the time has elapsed, simply press the [STANDBY/ON] button.
Access via a UPnP Server Localising and Playing Files Note: Windows Media Connect must be correspondingly configured to enable devices to be connected. 1. Open Windows Media Connect. 2. Select “Settings”. 3. Activate the “Automatically allow new devices” checkbox. 4. Select “Sharing”. 6. Press the [Add...] button to add this folder. 7. Select “Devices”. 4. Press the / buttons to select the UPNP SERVERS menu option. 5. Confirm the selection by pressing the [SELECT] button.
Access via a UPnP Server The radio receiver is now detected by Windows Media Connect and is displayed in the “Devices” list together with its MAC address. Note: If you want to compare the MAC address displayed with the one from the radio, navigate on the radio: CONFIGURATION −> NETWORK SETTINGS −> VIEW CONFIGURATION −> MAC WIRELESS ADDRESS or MAC WIRED ADDRESS. [>>] [>>] [>>] [>>] [>>] 9. A list of the media categories available on the server appears in the radio display.
Troubleshooting Troubleshooting If, contrary to our expectations, problems arise with the equipment, check the following information first. In such a case, contact your sales outlet, with the purchase receipt to hand, or the OLYMPIA Service Center directly. S Important information and interesting tips concerning the radio equipment are available on the “reciva” web site (http://radio.reciva.com/). S Proceed as follows when no connection can be established between the equipment and network: 1.
Guarantee and Technical Modifications Guarantee Technical Modifications Dear Customer, We are very pleased that you have decided to buy this product. In case the equipment is defective, return it together with the purchase receipt and original packaging to the point−of−sale. This operating instruction manual serves purely for information purposes. Its content is not part of any contract of sale. All the data relates to nominal values.
Notes OPERATING INSTRUCTIONS www.olympia-vertrieb.
Notes www.olympia-vertrieb.
Notes OPERATING INSTRUCTIONS www.olympia-vertrieb.
All rights reserved.
