Operation Manual

First Steps
OPERATING
INSTRUCTIONS
www.olympia-vertrieb.de
16Page
First Steps
Navigation in the Menu
The display in the unit provides menus in graphical and text form. Move to
the selection options by using the  /  or  /  buttons. To
confirm a selection, press the [OK] button.
Configuring the Equipment
1. Set the POWER switch to ON.
2. The company logo appears in the display.
3. The unit then searches for any network
components available.
4. If necessary, make a selection manually.
Select the menu option required and
confirm the selection.
S Internet access via LAN
S Internet access via WLAN
S Exit the network wizard
Internet access via LAN
1. If the network is not yet connected, a
corresponding message is displayed.
Connect the equipment with the network
via the LAN socket.
2. The network settings are checked. A
network access is established.
3. The equipment data is synchronised with
the network.
4. The equipment switches to Standby mode.
Note: If a connection to the network cannot
be established, an error message is
displayed. Refer to Section Network Settings
and/or Troubleshooting.
  
  
  
  
  
!!"#$ %&
'(( '((
)
*+,* -"
. /0 '