Operation Manual

Operation
www.olympia-vertrieb.de
OPERATING
INSTRUCTIONS
21Page
It is possible to select several tracks on a CD and to play them in
sequence.
1. Select the track required and press the
[Mem.] button.
The track is marked by a icon.
2. Repeat the steps for all the tracks
required.
3. Start playback.
Ripping from CD
The equipment provides the opportunity of saving WMA tracks, currently
being played on the CD, on an SD/MMC memory card or USB flash drive
as an MP3 file. The CD ripping speed is 1:1 in this case.
1. Select one or more tracks or all the tracks on the CD, as described
above, that you want save as MP3 files.
2. Press the [REC.] button.
3. If an SD/MMC memory card and USB flash drive have been installed, a
prompt appears requesting which of the two storage media should be
used to store the tracks on. Make the selection and confirm it.
If only an SD/MMC memory card or USB flash drive is installed, Point 3
is skipped.
4. Following a brief initialisation phase, the memory space available is
displayed.
5. The first track selected is played. Parallel to this, the data is converted
to MP3 format and saved on the storage medium selected.
Note: If the memory space available on the storage medium selected is
insufficient, a corresponding message is displayed together with the memory
space required.
Requesting CD information from gracenote
When a CD has been inserted, a check is automatically started as to
whether information on this CD is available on the gracenote internet page
(www.gracenote.com).
Note: A condition for requesting the data is that an internet connection
exists.
The icon appears on the right of the display during the loading process.
If data related to the CD is detected, it appears in the display.
Note: We assume no responsibility or liability that the data is transmitted
correctly.
/

 !$
 !
/

 $
 $5