SDS
79601 OLYMPIC MAXIMUM STAIN/SEALANT IN ONE SOLID COLOR-WHITE/BASE 1
Product name
10
Product code
Date of issue
Version
00402352
7 February 2018
Section 15. Regulatory information
SARA 313
SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include
copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.
SARA 302/304
SARA 304 RQ
:
Not applicable.
Composition/information on ingredients
SARA 311/312
Classification
:
Immediate (acute) health hazard
Delayed (chronic) health hazard
titanium dioxide
No.
No.
No.
No.
Yes.
-
Diatomaceous earth
Yes.
No.
No.
No.
No.
-
ethanediol
No.
No.
No.
Yes.
Yes.
-
octhilinone (ISO)
No.
No.
No.
Yes.
No.
-
Name
Fire
hazard
Sudden
release of
pressure
Reactive
Immediate
(acute)
health
hazard
Delayed
(chronic)
health
hazard
Composition/information on ingredients
All components are listed or exempted.
United States inventory (TSCA 8b)
:
United States
United States - TSCA 5(a)2 - Final significant new use rules:
United States - TSCA 5(a)2 - Proposed significant new use rules:
Additional environmental information is contained on the Environmental Data Sheet for this product, which
can be obtained from your PPG representative.
Supplier notification
Chemical name
:
zinc oxide
1314-13-2
1 - 5
ethanediol
107-21-1
0.5 - 1.5
CAS number
Concentration
No products were found.
Nonylphenol, ethoxylated
Listed
5-chloro-2-methyl-2H-isothiazol-3-one
Listed
P-96-1251
Section 16. Other information
Hazardous Material Information System (U.S.A.)
0
0
0
National Fire Protection Association (U.S.A.)
Health
Instability
Flammability
Health
Flammability
Physical hazards
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or
risks. Although HMIS® ratings and the associated label are not required on MSDSs or products leaving a facility under 29 CFR 1910.1200, the
preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark
and service mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS®
Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.
:
:
:
:
:
:
2
*
2
0
( * ) - Chronic effects
United States
Page: 13/14