Use and Care Manual

Olympic Wood Protector Stain + Sealant in One Solid Color
GENERAL DESCRIPTION PRODUCT DATA
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
Olympic Wood Protector Solid Color Stain provides waterproofing
protection with a rich, opaque color that allows the wood texture to
show, enhancing the beauty of wood. Wood Protector is recommend-
ed for use on any properly prepared exterior wood, including decks,
fences, siding, railings, outdoor furniture, and other wood surfaces.
Protects decks up to 5 years and fences and siding up to 15 years.
Pressure-treated wood
Weathered wood
Wood decks
Wood siding
PRODUCT TYPE: 100% Acrylic
SHEEN: Flat
VOLUME SOLIDS*: 29% +/- 2%
WEIGHT SOLIDS*: 40% +/- 2%
VOC*: <100 g/L (0.8 lbs./gal.)
WEIGHT/GALLON*: 9.96 lbs. (4.5 kg) +/- 0.2 lbs. (91 g)
*Product data calculated on 53201.
COVERAGE: Approximately 350 to 500 sq. ft. (32.5 to 46.5 sq. meters)
per gallon (3.78 Liters) depending on application, wood texture, and
porosity. Coverage figures do not include loss due to surface irregulari-
ties and porosity or material loss due to application method or mixing.
DRYING TIME: Dry time @ 50ºF (10ºC) to to 85°F (29°C); 50%
relative humidity.
To Recoat: 2 to 4 hours
Light foot traffic: 24 to 48 hours
High humidity or low temperature application may prolong drying and
recoating times. Allow 24 to 48 hours of drying time for light foot traffic
or furniture placement. Newly stained surfaces should be allowed to
cure 30 days before washing.
Drying times listed may vary depending on temperature, humidity, film
build, color, and air movement. Wait at least 30 days after staining
before cleaning the surface with a nonabrasive, mild cleanser.
CLEANUP: Clean brushes and tools with warm, soapy water.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
PRODUCT INFORMATION
53201 White Base 1
53202 Base 2* (must be tinted)
53206 Cedar
53209 Oxford Brown
53210 Outside White
*Must be tinted before use.
Some colors, drastic color changes, or porous substrates may require
more than one coat to achieve a uniform finish.
53201 Series
OLYMPIC
®
Wood Protector
53201 Series
Waterproofing Protection
SUNBLOCK
®
UV Defense
Exclusive SCUFF GUARD
®
Technology
Provides Mildew Resistant Coating
Self Priming
Easy Water Cleanup
LIMITATIONS OF USE
Apply when no precipitation is expected for 24 hours, and when air and
surface temperatures are 35°F to 90°F (2°C to 32°C) and will remain
above 35°F (2°C) for the next 24 hours. Avoid staining in direct sunlight
or on hot surfaces. DO NOT THIN. USE WITH ADEQUATE VENTILA-
TION. KEEP OUT OF REACH OF CHILDREN. Read all label and
Safety Data Sheet (SDS) information prior to use. SDS are available
through our website or by calling 1-800-441-9695.
PROTECT FROM FREEZING.
While this product provides a mildew resistant coating, growth may still
occur if the substrate is not properly prepared prior to painting and/or if
the substrate is consistently exposed to conditions conducive to mold,
mildew, and algae. Examples of these conditions include, but are not
limited to, under eaves, behind shrubbery and trees, and in areas that
are consistently damp with little to no direct sunlight.
PACKAGING
1-Gallon (3.78 L)
5-Gallon (18.9 L)
Not all products available in all sizes.
Read Label and Safety Data Sheet prior to use. See other cautions on last page.
CONFORMANCE STANDARDS
VOC compliant in all regulated areas