User's Manual Part 1

Chapter 2 Nomenclature and functions

OLYMPUS CAPSULE ENDOSCOPE SYSTEM

2.5 Real time viewer (OLYMPUS VE-1)

1. Display panel (color)

Displays endoscopic images sent by the capsule endoscope or the recorder

unit, as well as information such as battery pack level.

2. Battery pack removal ribbon

Used for removing the battery pack. With the battery pack removal ribbon

hanging out of the battery pack slot, insert the battery pack into the battery

slot.

3. Battery pack slot cover

Cover for the battery pack slot to hold the battery pack.

4. Battery pack slot

Insert the battery pack here. To remove the battery pack, pull the ribbon

located inside the slot.

5. Real time viewer cable connector (rubber cap)

Connect the real time viewer cable here. By connecting the real time viewer

to the recorder unit, the operation of the recorder unit can be checked, and

the endoscopic images can be viewed in real-time.

The rubber cap is provided for the protection of the viewer unit connector.

Attach the rubber cap when the real time viewer cable connector is not in

use.

6. Power switch

Turn the real time viewer ON by holding down the switch for 1 second or

more. Turn the real time viewer OFF by holding down the switch again for 1

second or more.

7. Power lamp