User's Manual Part 2

Chapter 5 Capsule Endoscope Procedures
103
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
1. Firmly insert the recorder unit all the way into a cradle that is connected to
the workstation. The recorder unit will be turned ON automatically. The
indicator lamp on the recorder unit is illuminated yellow for 2 seconds, and
then turns to green.
• When the recorder unit is inserted into the recorder unit
cradle, its power turns ON, and the normal startup screen is
displayed on its display panel for approximately 3 seconds.
Figure 5.5
• If the recorder unit contains image data, the patient ID and
patient name are displayed on the recorder unit’s display
panel (see Figure 5.6).
Figure 5.6
• If an error is detected on the recorder unit, the indicator lamp
will blink yellow, and the corresponding error code will be
displayed on the display panel. To troubleshoot, refer to
Chapter 8, “Troubleshooting” on page 233.