User's Manual Part 2

110
Chapter 5 Capsule Endoscope Procedures
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
6. Check your input on the initial setup confirmation screen, and then click the
[OK] button.
Figure 5.16
• Check that the information being displayed belongs to the
patient who is being examined.
• Patient information cannot be altered after the completion of
an examination. To change an entry, click the [Cancel] button
and return to the initial setup screen, then re-enter the
information.
7. Patient information is transmitted to the recorder unit. After transmission is
completed, the initial setup completion screen is displayed (see Figure
5.18).
During the initial setup, the icon shown in Figure 5.17 will be
displayed on the recorder unit’s display panel, and the
recorder unit’s indicator lamp will blink yellow.
Figure 5.17
OK button