User's Manual

3.3 Installation of the tube hanger
25
ALT-Y0003 INSTRUCTION MANUAL
Ch.3
2 Align the holes of the stay and the hanger part
and insert the one-touch rivets into the holes
from the hanger part side (see Figure 3.3).
Insert the new one-touch rivets until they hit the
surface of hanger part, and secure the stay to
the hanger part. (See Figure 3.4)
Figure 3.3
Figure 3.4
3 Align the pins on the rear panel of this
equipment with the grooves of the stay. Push
the stay onto this equipment and slide the stay
downward into position. (To install the tube
hanger in the left side viewed from the front,
match the groove of the stay with the pins on
the right.)
Figure 3.5
One-touch rivets