User's Manual

4.1 Installing the ALT-Y0003 leak test air tubes and turning ON the power
31
ALT-Y0003 INSTRUCTION MANUAL
Ch.4
Tabl e 4.1
6 When using the printer, turn ON the power switch of the printer.
7 Turn ON the power switch of this equipment.
8 The power indicator will turn ON. The startup screen and the connection status of the
printer will be displayed on the LCD monitor. (See Table 4.1)
Indicator Description
Displayed when Auto Print is not set.
Displayed when Auto Print is set and the power of printer is
turned ON.
Displayed when Auto Print is set and the power of printer is not
turned ON
• When a printer is used, a self-check (Section 4.2)
automatically starts by.turning ON the printer.
• When a printer is not used, a self-check (Section 4.2)
automatically starts by.pressing the OK button.
1.;/275#.6;
#WVQ2TKPV&KUCDNGF
1.;/275#.6;
#WVQ2TKPV#EVKXCVGF
2TKPVGT10
1.;/275#.6;
#WVQ2TKPV#EVKXCVGF
6WTPVJG2TKPVGT10
=?$GIKP5GNH%JGEM