User's Manual

5.5 Recognition of scope ID
43
ALT-Y0003 INSTRUCTION MANUAL
Ch.5
The LCD monitor indicators change as shown in Figure 5.6 below when the ID is entered or when the
endoscope is connected.
Figure 5.6
NOTE
When the STOP/BACK button is pressed in any screen from (b) to (e) in Figure 5.6
above, the screen returns to “(a) Standby screen (Waiting for the input of ID)”. In
this case, all the scope IDs and user IDs need recognizing again.
5ECP5EQRG+&
ޓޓޓޓ1T7UGT+&
=/'07?)QVQ/GPW

%QPPGEV5EQRG
)+(:::
5ECP7UGT5EQRG+&
)+(:::
%QPPGEV5EQRG
)+(:::
)+(;;;
5ECP7UGT+&
)+(:::
)+(;;;
(a) Standby screen (Waiting for ID entry)
Recognition of Scope ID (of a first endoscope)
(b) Waiting for the connection of an endoscope
Connect the endoscope to Scope Connector 1
(c) Waiting for ID entry
Recognition of Scope ID (of a second endoscope)
(d) Waiting for the connection of another endoscope
Connect the endoscope to Scope Connector 2
(e) Standby screen (Waiting for ID entry
Endoscope Code No./Serial No.