Use Instructions

21 Additional calibrations for a fluorescence system
6. Finalize the process by clicking the [Finish] button.
If you see the message below please check if you are doing the calibration
on the correct checkerboard area.
ATTENTION
In case you have calibrated an immersion medium objective as well clean the
objective and remove immersion medium residues from the calibration slide.
See Immersion Objectives auf Seite 38.
21.5 Shading correction BFMono
1. In the [Calibrations] dialog box select the [Shading Correction] entry and
click the [Calibrate] button.
- 153 -
Instructions for useOLYMPUS VS200 System