Use Instructions

22 Cleaning the system
22.1 Cleaning the scanner
We recommend cleaning the scanner as required when you can see that it is dirty.
ATTENTION
Ingress of fluid can damage the devices.
An ingress of fluid can cause a short circuit or damage the scanner, individual
components of the scanner, the loader, and connected devices.
Before cleaning the VS200 system, disconnect it from the power supply.
Protect the scanner, the loader, and individual components from dirt, water
and ingress of fluids.
Clean only the surface of the scanner, the loader and the individual com-
ponents.
1. Disconnect the scanner from the power supply.
2. Clean the following components with a lint free cleaning cloth.
The surface of the scanning stage
Liquid dispenser head
3. For more pronounced marks, you can lightly wet the cleaning cloth with
water or a mild solvent-free disinfectant or cleaning agent.
4. Clean the clamping mechanism only with a lint free cleaning cloth.
5. If the scanner or individual components were cleaned with a damp cloth,
allow them to dry.
22.2 Cleaning the loader
ATTENTION
Ingress of fluid can damage the devices.
An ingress of fluid can cause a short circuit or damage the scanner, individual
components of the scanner, the loader, and connected devices.
Before cleaning the VS200 system, disconnect it from the power supply.
Protect the scanner, the loader, and individual components from dirt, water
and ingress of fluids.
Clean only the surface of the scanner, the loader and the individual com-
ponents.
1. Take all of the trays out of the loader.
2. Disconnect the VS200 system from the power supply.
3. Open the door of the loader.
4. Manually move the SCARA robot arm to the right.
5. Move the tray hotel to the loading position all the way at the front.
- 174 -
Instructions for use
22 Cleaning the system
OLYMPUS VS200 System