Use Instructions
Table Of Contents
- 1 About this manual
- 2 Safety
- 3 Hinweise zum Aufstellen
- 4 Tools and accessories
- 5 Scope of supply
- 6 System diagram
- 7 Trays
- 8 Specifications
- 9 Unboxing
- 10 Mounting of components
- 11 Mounting fluorescence components
- 12 Assembly of the housing for scanner
12. Push the bracket upwards until it attaches to the IX3-RFALFE and tighten
the two hex socket screws.
13. Make sure the power is switched off and attach the IX3-RFACA cable to the
socket at the back of the IX3-RFACA.
14. Attach the black tamper protection plate again and tighten the six hex
socket screws.
- 44 -
Instructions for use
11 Mounting fluorescence components
OLYMPUS VS200 System