User Manual
Table Of Contents
- CAMERA OPERATION MANUAL
- How to use this manual
- Composition of the manual
- Contents
- Names of parts
- 1 Getting started
- 2 Using the menus
- 3 Shooting basics
- 4 Flash
- 5 Advanced shooting
- A/S/M mode
- Aperture priority shooting
- Shutter priority shooting
- Manual shooting
- Using My Mode
- Focusing applications
- Metering
- AE LOCK - Locking the exposure
- Macro mode shooting
- Super macro mode shooting
- Self-timer shooting
- Remote control shooting
- Sequential shooting
- PANORAMA - Panorama shooting
- 2 IN 1 - Taking two-in-one pictures
- FUNCTION - Adding special effects to pictures
- Recording sound with still pictures
- Recording sound with movies
- Using commercially available external microphones
- 6 Adjusting the image quality and exposure
- 7 Playback
- 8 Useful functions
- ALL RESET - Saving the camera’s settings
- CUSTOM BUTTON
- SHORT CUT
- MY MODE SETUP
- CARD SETUP - Formatting cards
- Information display
- Monitor/viewfinder brightness adjustment
- REC VIEW
- SLEEP - Sleep Timer
- Beep
- SHUTTER SOUND
- VOLUME - Playback volume
- POWER ON/OFF SETUP - Power on/off display/sound setting
- SCREEN SETUP
- FILE NAME
- PIXEL MAPPING
- Measurement units
- VIDEO OUT - Video output selection
- 9 Print setting (DPOF)
- 10 Direct printing (PictBridge)
- 11 Miscellaneous
- DIGITAL CAMERA - PC CONNECTION OPERATION MANUAL
139
Playback
7
Recording sound
Sound can be added to a still picture that you have already taken. (This is known
as “after-recording”.) You can also re-record over the sound that has already
been recorded. Total recording time per picture is approximately 4 seconds.
1 Use the arrow pad to select the
still picture you want to add
sound to.
2 In the top menu, select MODE
MENU Æ PLAY Æ
R.
g“How to use the menus” (P.35)
3
Press
d
to display START.
4 Turn the camera microphone toward
the sound you want to record and
press e to start recording.
• The BUSY bar is displayed during
recording.
• If the microphone is placed farther than 1 m (3.3 ft.) from the subject,
sound may not be recorded properly.
• If you re-record the sound, the original sound is erased.
• You may not be able to record sound when there is insufficient card
memory (the “CARD FULL” message is displayed).
• Sound recording may pick up camera noises, such as button
operation or shutter movement.
• Once sound is added to a picture, it is not possible to erase only the
sound. In this case, make a re-recording with silence.
Arrow pad
OK button
Microphone
CARDSEt EDIt
PLAY
StARt
Note