User Manual
Table Of Contents
- CAMERA OPERATION MANUAL
- How to use this manual
- Composition of the manual
- Contents
- Names of parts
- 1 Getting started
- 2 Using the menus
- 3 Shooting basics
- 4 Flash
- 5 Advanced shooting
- A/S/M mode
- Aperture priority shooting
- Shutter priority shooting
- Manual shooting
- Using My Mode
- Focusing applications
- Metering
- AE LOCK - Locking the exposure
- Macro mode shooting
- Super macro mode shooting
- Self-timer shooting
- Remote control shooting
- Sequential shooting
- PANORAMA - Panorama shooting
- 2 IN 1 - Taking two-in-one pictures
- FUNCTION - Adding special effects to pictures
- Recording sound with still pictures
- Recording sound with movies
- Using commercially available external microphones
- 6 Adjusting the image quality and exposure
- 7 Playback
- 8 Useful functions
- ALL RESET - Saving the camera’s settings
- CUSTOM BUTTON
- SHORT CUT
- MY MODE SETUP
- CARD SETUP - Formatting cards
- Information display
- Monitor/viewfinder brightness adjustment
- REC VIEW
- SLEEP - Sleep Timer
- Beep
- SHUTTER SOUND
- VOLUME - Playback volume
- POWER ON/OFF SETUP - Power on/off display/sound setting
- SCREEN SETUP
- FILE NAME
- PIXEL MAPPING
- Measurement units
- VIDEO OUT - Video output selection
- 9 Print setting (DPOF)
- 10 Direct printing (PictBridge)
- 11 Miscellaneous
- DIGITAL CAMERA - PC CONNECTION OPERATION MANUAL
185
10
Direct printing (PictBridge)
Connecting the camera to a printer
Use the USB cable provided to connect the camera to a PictBridge-
compatible printer.
1 Turn the printer on and plug the
printer end of the USB cable into
the printer’s USB port.
• For details of how to turn the printer on
and the position of the USB port, refer to
the printer’s instruction manual.
2 Plug the USB cable into the
camera’s USB connector.
3 Slide the power switch to q to
turn the camera on.
• The monitor turns on and the selection
screen for the USB connection is
displayed.
4 Press ac to select PRINT, then
press e.
• ONE MOMENT is displayed and the
camera and printer are connected. The
PRINT MODE SELECT screen is
displayed on the monitor. Make the print
settings on the camera’s monitor. gGo
to “Printing pictures” (P.186).
• When the USB mode is set to PC, the PRINT MODE SELECT
screen is not displayed. Remove the USB cable, and repeat the
procedure from Step 1.
USB connector
Connector cover
Power switch
GO
SELECt
Note