User Manual

201
11
Miscellaneous
Troubleshooting
zPreparatory operations
zShooting
Possible cause Corrective action Ref. page
The camera does not turn on or function buttons do not respond.
The power is off. Slide the power switch to K or n to turn the
camera on.
P.25
The battery is exhausted. Charge the battery. P.19
The battery is temporarily
unable to function
because of the cold.
Warm the battery by putting it in your pocket
for a while.
—
The camera is in the
sleep mode.
Operate the camera (press the shutter button
or turn the zoom lever).
P.25
The camera is connected
to a PC.
The camera will not operate while it is
connected to a PC.
—
Possible cause Corrective action Ref. page
No picture is taken when the shutter button is pressed.
The battery is exhausted. Charge the battery. P.19
The camera is in the
playback mode.
Slide the power switch to K or n.P.25
The flash has not finished
charging.
Remove your finger from the shutter button,
and wait until the #(flash standby) indication
stops blinking. Press the shutter button
again.
P.61
The card is full. Erase unwanted pictures or insert a new
card. Before erasing, download important
images to a PC.
P.145
The battery ran out of
power during shooting or
while the images were
being written to the card.
(Monitor turns off or the
battery check indicator
blinks.)
Charge the battery. (Wait until the card
access lamp turns off when flashing.)
P.19
The memory gauge is full. Wait until there is room in the memory gauge. P.17
There is a problem with
the card.
Refer to “Error codes”. P.200