User Manual
Table Of Contents
- CAMERA OPERATION MANUAL
- How to use this manual
- Composition of the manual
- Contents
- Names of parts
- 1 Getting started
- 2 Using the menus
- 3 Shooting basics
- 4 Flash
- 5 Advanced shooting
- A/S/M mode
- Aperture priority shooting
- Shutter priority shooting
- Manual shooting
- Using My Mode
- Focusing applications
- Metering
- AE LOCK - Locking the exposure
- Macro mode shooting
- Super macro mode shooting
- Self-timer shooting
- Remote control shooting
- Sequential shooting
- PANORAMA - Panorama shooting
- 2 IN 1 - Taking two-in-one pictures
- FUNCTION - Adding special effects to pictures
- Recording sound with still pictures
- Recording sound with movies
- Using commercially available external microphones
- 6 Adjusting the image quality and exposure
- 7 Playback
- 8 Useful functions
- ALL RESET - Saving the camera’s settings
- CUSTOM BUTTON
- SHORT CUT
- MY MODE SETUP
- CARD SETUP - Formatting cards
- Information display
- Monitor/viewfinder brightness adjustment
- REC VIEW
- SLEEP - Sleep Timer
- Beep
- SHUTTER SOUND
- VOLUME - Playback volume
- POWER ON/OFF SETUP - Power on/off display/sound setting
- SCREEN SETUP
- FILE NAME
- PIXEL MAPPING
- Measurement units
- VIDEO OUT - Video output selection
- 9 Print setting (DPOF)
- 10 Direct printing (PictBridge)
- 11 Miscellaneous
- DIGITAL CAMERA - PC CONNECTION OPERATION MANUAL
208
Troubleshooting
11
Miscellaneous
zWhen the camera is connected to a PC or printer.
Possible cause Corrective action Ref. page
The printer fails to connect.
PC was selected on the
monitor after connecting
to the printer with a USB
cable.
Remove the USB cable, and start again from
step 1 of “Connecting the camera to a
printer”.
P.185
The printer does not
support PictBridge.
Refer to the printer’s instruction manual or
contact the manufacturer.
—
The camera is not recognized by the PC.
The USB driver has not
been installed.
It is necessary to install the USB driver for
Windows 98/98SE. For installation
instructions, see “DIGITAL CAMERA-PC
CONNECTION OPERATION MANUAL” on
the CD-ROM.
—
The camera has not been
turned on.
Slide the power switch to q to turn the
camera on.
P.25