User Manual

Connecting the camera to the computer
25
Macintosh
4 Turn the camera on in
(playback) mode.
• Most cameras with a lens barrier
turn on automatically in Step 3,
with the exception of some
models which require you to press
the (monitor) button or
button.
5 When the screen shown right
appears on the monitor in
Step 4, use the arrow pad to
select “PC” and press the OK
button.
6 The computer recognizes the
camera as a new device.
• Depending on the camera model,
when you connect the camera to
the computer, the lamp on the
right of the viewfinder or the self-timer lamp may light.
The computer recognizes the camera automatically and an “Untitled”
icon appears on the desktop. If you cannot find this icon, turn off the
camera and connect again.
 Mac OS X
When the computer has recognized the camera, the Apple Image
Capture software automatically launches. p.29
When the camera is connected to the computer, none of the camera buttons
are functional.
button or
button
Lens barrier
Mode dial
Power switch
Power switch
OK button
Arrow pad
GO
SELECt